XGOLD Spray Machine Tutorial Make Spraying Easy and Enjoyable

1. Preparation Before Operation: The First Step to Smooth Spraying

Before you begin, organize all essential XGOLD spray machine components: the main machine unit, spray hose, spray gun, filter, and paint container.
Firmly connect the spray hose to the output port of the XGOLD machine, then attach the spray gun.

One crucial step: filter the paint in advance.
This prevents clogging in the spray system and ensures smooth, even spraying.

Be sure to check the power supply and voltage to make sure the XGOLD spray machine runs steadily without unexpected shutdowns.

2. Adjusting Spray Pressure: A Key Factor in Spray Quality

The XGOLD spray machine allows pressure adjustment depending on the material and coating requirement.
Too much pressure creates excessive mist and paint waste; too little results in rough or uneven coating.

Start with medium pressure, test spray on a piece of cardboard, observe the atomization pattern, and adjust accordingly before full operation.

3. Correct Spraying Technique: Maintain Distance and Steady Movement

When using the XGOLD spray machine, keep the following principles in mind:

● Maintain a distance of about 20–30 cm from the surface

Too close can cause paint buildup; too far leads to dry or patchy coating.

● Keep the spray gun moving consistently

Stopping in one spot will create thick, uneven paint layers.

● Overlap each spray path by 30–50%

This ensures even coverage without streaks or color differences.

For large surfaces such as walls, spray horizontally first, then vertically for a finer, more complete finish.

4. Spraying Tips for Different Materials

● Wood: thin base coat first, then a second coat

Start with a light base layer, then apply a thicker second layer for a natural, smooth texture.

● Metal: clean the surface well before spraying

Remove oil, dust, and rust to ensure proper adhesion.

● Walls: keep a consistent speed and spray distance

Large areas require even movement to avoid streaks or uneven patches.

5. Cleaning After Spraying: Essential for Protecting Your XGOLD Spray Machine

Right after finishing the job, clean the spray gun, spray hose, and filters.
Pour water or thinner into the XGOLD spray machine and let it run for a few minutes for internal flushing, then clean the spray gun separately.

Regular cleaning helps extend the machine’s lifespan and ensures reliable performance for future projects.

Conclusion: XGOLD Makes Spraying Easier, Faster, and More Professional

Whether you’re working on home improvement, furniture restoration, or professional construction, following these steps allows your XGOLD spray machine to deliver top-level efficiency and smooth, consistent results.
Once you get the hang of the technique, spraying becomes simple—and surprisingly enjoyable.